|
| Open
a canvas size 400x500, transparent. Load the P-heart1.
Effects-3D Effects-Cutout. Settings below.
 |
|
Add a
raster layer, flood fill with color 1. Name this layer
"heart1". Move this layer down. Merge the cutout layer down.
Adjust/ Add-Remove Noise/ Add noise. Settings: Uniform
checked, Noise 25%, Monochrome checked.
Lighten/ Darken brush. Settings below. Apply highlights.
Load the P-heart2. Add a raster layer. Cutout, opacity
75, Blur 50. Add another layer, name it heart2 and flood
fill with color #2. Move this layer down. Merge the cutout
layer down. Add Noise, use the same settings. Apply Lighten/
Darken, use the same settings.
Repeat the process on the next 2 hearts.
Load the P-heart5. Add a raster layer, apply cutout.
Reduce the cutout opacity to 50 and blur to 25. Add another
layer and name this "heart5". Flood fill with #5 color. Move
this layer down. Merge the cutout layer down.
You should have an image that looks exactly or similar to
the image below.
|
|
Lighten-Darken Brush
2
|
| Now let's do the
fun part. Load the P-right arm. Add a raster layer and
flood fill with color #8.
Lighten/ Darken brush. Settings: lighten/ darken brush 2.
Apply Lighten/ darken brush to the paws and arm.
Change the size 100, when lightening the arm.
|
|
 |
|
| Smudge
the image. Use the smudge settings below.
 |
|
|
Deselect and smudge around the edges, from inside then out.
Add noise. Settings below.
 |
|
| Soften
brush. Soften around the paws area.
Load the P-right-arm-paw-lines. Add a raster layer and
flood fill with #8. Deselect. Blur/ Gaussian Blur 1. Merge
this layer down. |
|
 |
|
| Load the
P-right-ear. Add a raster layer and flood fill with #8.
Lighten the parts shown on the screen shot. |
|
 |
|
| Smudge the
lightened part, use the same settings. Deselect and smudge
around the edges. Add noise. |
|
 |
|
| Load the
P-right-leg. Add a raster layer and flood fill with #8.
Lighten the parts shown on the screen shot. |
|
 |
|
|
|
Smudge the
lightened part. Smudge around the edges. Use the same
settings. Soften brush, soften the sole of the foot.
Paint brush, size 10, hardness 27, step 25, density 100,
thickness 100, opacity 100, color #6. Paint brush 2 ellipses
on the foot.
Lighten/ Darken Brush. Change the size to 3 and density 100.
Apply highlights on the ellipses. Add noise, use the same
settings. Add noise. Deselect. |
|
 |
|
| Load
the P-right-foot-paw-lines. Add a raster layer, flood fill
with #8. Add drop shadow/ Vertical and Horizontal 1/ Opacity
60/ Blur 6. Deselect. Merge this layer down. |
|
| Load the P-body. Add a raster
layer and flood fill with #8. Lighten/ Darken brush, size
75. Lighten the parts shown on the screen shot. |
|
 |
|
Smudge brush
size 20. Smudge the edges of the lightened part. Soften
Brush, size 48. Soften the llightened part.
Smudge around the edges. Add noise |
|
 |
|
| Load the P-left leg. Add a
raster layer. Lighten/ Darken brush. Lighten the parts shown
on the screen shot |
|
 |
|
| Smudge
brush/ same settings. Smudge the lightened part. Soften
brush, soften the sole of the the foot. Deselect. Smudge
around the edges. |
|
| Paint brush, use the same
settings and color. Paint brush a couple ellipses on the
foot. Lighten/ Darken brush/ size 3, change the density to
100. Apply highlights on the ellipses. Add noise. Load the
P-left-foot-paw-lines. Add a raster layer and flood fill
with #8. Apply drop shadow/ Vertical and Horizontal 1/
Opacity 60/ Blur 6. Deselect and merge this layer down. |
|
 |
|
| Load the P-head. Add a raster
layer and flood fill with #8. Lighten the parts shown on the
screen shot |
|
 |
|
Smudge the edges of
the lightened part. Soften brush, soften the image.
Deselect.
Smudge around the edges. Soften it one more time. Add noise. |
|
 |
|
|
| Load the
P-face-lines. Add a raster layer. Flood fill with #9.
Deselect. Apply Gaussian Blur, radius 1. |
|
| Load the
P-eyes-shades. Add a raster layer and flood fill with
#565651. Lighten/ Darken brush size 12. Darken the parts
shown on the screen shot. |
|
 |
|
| Soften brush
size 20. Soften the lightened part. Deselect. Smudge the
around the edges. |
|
 |
|
| Load
the P-eyes. Add a raster layer and flood fill with #8. Load
the P-eyelashes, flood fill with the same color. |
|
| Load
the P-muzzle. Add a raster layer and flood fill with #8.
Lighten the part shown on the screen shot. Smudge the
lightened part. Soften brush, soften the image. Deselect. |
|
 |
|
|
Smudge around the edges. Add noise. |
|
 |
|
Load
the P-mouth-lines. Add a raster layer and flood fill with
#9.
Load the P-nose. Add a raster layer and flood fill with #9.
Lighten/ Darken brush size 4/ change the density to 100.
Apply highlights on the nose. Deselect. |
|
|
Airbrush/ size 7/ color #9. Add a raster layer. Airbrush the
cheeks. Apply Gaussian blur/ Radius 4. |
|
 |
|
| Load
the P-left-ear. Add a raster layer and flood fill with #8.
Lighten the part shown on the screen shot. Smudge the image.
Deselect. Smudge around the edges. Apply noise. |
|
 |
|
| Load
the P-left-arm. Add a raster layer and flood fill with #8.
Lighten the part shown on the screen shot. Smudge the image.
Deselect. Smudge around the edges. Add noise.
|
|
 |
|
| Load
the P-left-hand-paw-lines. Add a raster layer and flood fill
with #8. Add drop shadow. OK |
|
| Load
the P-ribbon1. Add a raster layer and flood fill with #7.
Burn Brush/ size 15/ hardness 50/ step 25/ density 100/
thickness 100/ opacity 60. Darken the parts shown on
the screen shot. |
|
 |
|
| Load
the P-ribbon2. Add a raster layer and flood fill with #7.
Burn Brush, use the same settings. Darken the parts shown on
the screen shot. Load the P-ribbon3. Add a raster layer
and flood fill with #7. Move this layer below the P-head.
Burn brush, use the same settings. Darken the parts shown on
the screen shot. |
|
 |
|
| Make an
enhancement to your image before merging all the layers. Add
text to your image. Merge all the layers visible and save
your image.
End of Tutorial
|
|
|
PSP8 Tutorial index |
